K-Bond Polyester Stone Adhesive Transparent Paste - Quart
- Light colored knife grade polyester stone adhesive
- Fast curing
- Consistent thickness
- Can be colored with K-Bond Color Pigments to match many stones
- Used for seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods
- Good adhesion to natural stone up to 70 degrees C or 160 degrees F
- Resistant to water and oil
Documents
K-Bond Polyester Transparent Paste
K-Bond POLYESTER Transparent Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.
Directions:
1- Make sure stone surfaces are clean of any substance and dry.
2- Measure out the appropriate amount of polyester resin, then measure out the appropriate amount of hardener.
3- Next carefully mix the components together. Be careful to scrape the sides and bottom of mixing cup to ensure thorough mixing.
Attention:
- Do not “stir” product. This can trap air and cause bubbles.
- Overworking of product can cause the product to become thinner.
- Do not use once gelling has begun.
Safety Precautions
- Ensure good ventilation
- Wear gloves and safety glasses
For further information, please consult the Material Safety Data Sheet.
Özellikler
| Marka | K-BOND |
| Color | Translucent Yellow |
| Applicable Material | Natural and Engineered stones. |
| Working Time | 4 to 6 minutes |
| Volume | 0.25 Gallon |
| Includes | 1 oz. Polyester Hardener |