Bellinzoni Super Crystal Yellow Polishing Powder for Marble - 1 kg
Documentos
Super Crystal Powder
SUPER CRYSTAL is a high-quality polishing powder designed for the final polishing and re-polishing of various types of stone floors, including marble, agglomerate, marble-cement, terrazzo, and limestone. This product is specifically formulated for use on calcareous materials.
Key Features:
- Surface hardening: Hardens the surface of the floor, providing protection against scratches and scrapes.
- Long-lasting shine: Restores the natural shine of the material, giving it a long-lasting glossy finish.
- Ideal for restoration: Perfect for restoring surfaces worn by time or foot traffic, revitalizing their beauty.
- Suitable for heavy traffic areas: Also suitable for hardening surfaces subjected to heavy traffic.
- Water-based application: To be used with water and a buffing pad to achieve excellent results.
Method of Use:
- Spread SUPER CRYSTAL on the floor manually in circular motions, covering an area of approximately a couple of square meters (approx. 20 square feet).
- Equip a single disc machine with a natural fiber disc and position it on the powder-covered floor.
- Wet the floor with water using a sprayer or solution tank water control.
- Turn on the floor machine and work water and SUPER CRYSTAL into a slurry. Maintain a watery slurry by adding SUPER CRYSTAL or water as necessary.
- Work in small areas of no more than 1-2 square meters (15-20 square feet) at a time. Do not allow the slurry to dry on the floor at any time.
- After polishing each area, check the result using a window squeegee. Move the slurry to the next area to be polished once a high polish is achieved.
- Rinse the floor with clean water to remove all SUPER CRYSTAL slurry from the surface and grout joints.
- Repeat the polishing process, adding water or SUPER CRYSTAL as needed, until the entire area reaches the desired polish.
- Wash the floor thoroughly with clean water and an alkaline detergent such as DECER-DOS or ULTRA STRIPPER, and allow it to dry.
Coverage: With 1 kg (35 oz.) of product, it is possible to polish approximately 40/50 m2 (430/540 sq.ft.), depending on the degree of wear of the floor.
Especificaciones
| Marca | BELLINZONI |
| Color | Yellow |
| Applicable Material | Marble, Terrazzo amd Agglomerated Marbles |
| Product Dimensions | 4" x 4" x 6.25" |