Bellinzoni Eureka Quartz Resin Polishing Gel 1 L
Belgeler
Eureka Quartz Resin
EUREKA is a new polishing gel designed for quick and easy polishing of quartz resin with a single-disc machine. EUREKA QUARTZ is ideal for polishing engineered quartz-based stones.
Method of use:
Application on Tables, Bathroom or Kitchen Countertops, Bar Counters, and Coverings:
Surface Preparation: The surface must be dry and clean. Wash the material to remove dirt and any residues of old waxes and treatments (we recommend using our ULTRA STRIPPER); rinse very well and dry. Place a small amount of product (10-15 grams) on the surface to be treated, dampen with a few drops of water; place the Eureka Pad on the gel and polish using an orbital sander with adjustable speed at low RPMs, between 800-1500 RPM (optimal speed is 1000 RPM). Work the surface until the gel is completely dry and the desired shine is achieved. Clean any residues with water and a neutral detergent. If necessary, the above procedure can be repeated.
Application on Floor:
Surface Preparation: The surface must be dry and clean. Thoroughly wash the floor with a single-disc machine and an appropriate pad, removing dirt and any residues of old waxes and treatments (we recommend using our ULTRA STRIPPER); rinse very well and dry with a wet vacuum. Place a small amount (about 30 grams) of “Eureka” directly on the floor, under the natural bristle pad, slightly dampen, and then polish with a single-disc machine (150-400 RPM and at least 30 kg in weight) over an area of about 1-2 m². Spray or pour water if the gel dries too quickly during the process. After distributing the product, work the surface until the gel dries, achieving the desired shine. Finally, wash and rinse with water and an alkaline substance (soda, bicarbonate, or our LEM-3 or ULTRA STRIPPER detergent) to remove product residues and neutralize residual acidity.
Özellikler
| Marka | BELLINZONI |
| Applicable Material | Engineered Stones |
| Volume | 1 L |
| Product Dimensions | 4" x 4" x 6.25" |